About 6 Piece Starter Kit (Chain, Round, and Bent Nose - Wide and Taper Jaw)
Tronex 6 Piece General Purpose Set, standard handle, contains one each of: Tronex Pliers P511, P531, P545, P552, 5223 & 5513 Cutters .
This set with its long & short jaws provides you with options when working on a variety of projects.
P511: Chain nose pliers are an essential tool for jewelry artists. They are used for holding, gripping and bending wire. Overall Length: 5.5” (140mm) - Tip Length: 1.3” (33mm)
Recommended AWG usage: Throat: 16 gauge and finer - Tips: 20 gauge and finer.
P531: Round nose pliers are typically used for making loops or creating round bends in wire. Overall Length: 5.4” (137mm) - Tip Length: 1.25” (32mm)
Recommended AWG usage (Soft Copper Wire): Throat: 18 gauge and finer - Tips: 24 gauge and finer.
P545: Wide short jaw flat nose pliers are used for gripping and bending wire. Overall Length: 5.” (127mm) - Tip Length: .81” (21mm)
Recommended AWG usage (Soft Copper Wire): Throat: 14 gauge and finer - Tips: 18 gauge and finer
P552: Bent nose pliers are perfect for heavier gauge wire-work. The very fine tips allow for access into very confined areas. The bend in the tips is great for gripping and holding. Overall Length: 5” (127mm) - Tip Length: .8” (20mm)
Recommended AWG usage (Soft Copper Wire): Throat: 14 gauge and finer - Tips: 20 gauge and finer
5223: This Medium Taper Relieved Head Cutters is Tronex's most popular cutter. Pointed head allows for increased cutting access yet has sufficient strength to avoid tip breakage when used within its capacity.
Overall Length: 4.6” (117mm) - Tip Length: .45” (11mm)
Cutting Capacity (rating is for soft copper wire)
Model | Cut | Inch | MM | AWG |
5223 | Razor Flush | .004”-.035” | 0.1-0.9mm | 38-19 |
5513: Oval Head Cutters Large. Large Oval Head Cutters are excellent general purpose cutters. More head material for greater cutting capacity. Overall Length: 4.7” (119mm) - Tip Length: .53” (13mm)
Cutting Capacity (rating is for soft copper wire)
Model | Cut | Inch | MM | AWG |
5513 | Razor Flush | .004”-.051” | 0.1-1.3mm | 38-16 |
- P511: Chain Nose (Long Jaw)
- P531: Round Nose (Long Jaw)
- P545: Wide Flat Nose (Short Jaw)
- P552: Bent Nose Pliers - 60° Sturdy Tips
- 5223: Taper Head, Relieved, Razor Flush Edges
- 5513: Oval Head, Large, Razor Flush Edges
- Wood Pliers Stand
Recently Viewed
Helping you to
Keep crafting
#PEPETOOLS
Show us what you're creating